What Are The Precautions For Using Arc Furnace Transformers?

The arc furnace transformer is a key equipment in industrial smelting, and its safe and stable operation requires strict adherence to the following points:

1. Load Matching
The output voltage and current should be adjusted according to the electrode diameter and the charge impedance to avoid overload, which could cause winding overheating or insulation aging. Before start-up, always confirm that the secondary side is in an open-circuit state to avoid inrush current caused by a sudden flux increase.

2. Cooling System Maintenance
Regularly check the oil level, temperature rise, and dielectric strength of the equipment, and ensure that the cooling fans operate normally. For dry-type models, monitor the effectiveness of the temperature control device and clear accumulated dust promptly to keep ventilation unobstructed.

3. Insulation Monitoring
Use online monitoring tools to track changes in the insulation resistance of components such as bushings and tap changers. If abnormal discharge sounds or a burnt smell is detected, shut down the equipment immediately for inspection and repair. In harsh environments, anti-pollution flashover measures should be strengthened.

4. Operating Procedures
It is strictly prohibited to switch taps under load; after a power outage, the equipment must be fully discharged before high-voltage components are touched. Establish a daily inspection routine and record fluctuations in operating parameters to provide a basis for preventive maintenance.

Through sound management, the service life of arc furnace transformers can be extended and the efficiency of metallurgical production improved.


Inquiry Form

No file chosen
Supported formats: PDF (max 10MB)
  
Thank you. Your inquiry has been received. We will respond within 24 hours.